deenesfr

CERTIFICATES

All DIAN brand shoes labelled CE, indicate that they are in compliance with the 89/686/CEE directive, on personal protective equipment. P.P.E

Category I: Due to the simple design of P.P.E’s, the user can judge for themselves its effectiveness against minimal risks whose effects, when they are gradual, can be detected on time and without danger to the user. They have to have an EC declaration of conformity from the manufacturer, WITHOUT THE INTERVENTION OF A NOTIFIED BODY. The light footwear in this category only protects you from minor impacts and vibrations, which do not affect the vital parts of the body and cannot cause irreversible damages.

– Category II: Footwear certified as category II must have EC-DESIGN EXAMINATION CERTIFICATE, issued by a notified body such as INESCOP. In reference to the corresponding standards, EN-ISO-2034, for work footwear or EN-ISO-20345 for safety shoes

Standard for work footwear: EN-ISO-20347

Class I (leather shoes and other materials, excluding all rubber footwear and all polymer).

Designation: there are different levels of symbols based on the protection provided.

SRC+01+F0

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

O1 = antistatic, energy absorbing heel, sole with ridges.

FO = sole resistant to hydrocarbons and oils.

SRC+01

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

O1 = antistatic, energy absorbing heel, sole with ridges.

SRA+01+F0

SRA = non-slip on tiled surface with water and detergent.

O1 = antistatic, energy absorbing heel, sole with ridges.

FO = sole resistant to hydrocarbons and oils.

SRA+0B+E

SRA = non-slip on tiled surface with water and detergent.

E = energy absorbing heel.

OB = basic requirements.

SRC+0B+E

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

E = energy absorbing heel.

OB = basic requirements.

SRA+F0+E+0B+A

SRA = non-slip on tiled surface with water and detergent.

FO = sole resistant to hydrocarbons and oils.

E = energy absorbing heel.

OB = basic requirements.

A = antistatic

Standard for work footwear: EN-ISO-20345 standard

Class I (leather shoes and other materials, excluding all rubber footwear and all polymer).

Designation: there are different levels of symbols based on the protection provided.

SRC+S2

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

S2 = 200J safety toe, antistatic, energy absorbing heel, sole with ridges, insteps with waterproof material, sole resistant to hydrocarbons and oils.

SRA+SBEA

SRA = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

SBEA = antistatic, energy absorbing heel, sole with ridges.

SRC+S3

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

S3 = 200J safety toe, antistatic, anti-puncture insole pads, energy absorbing heel, sole with ridges, insteps with waterproof material, sole resistant to hydrocarbons and oils.

SRC+S1+P

SRC = non-slip on tiled surface with water and detergent + non-slip on steel with glycerine as a lubricant.

S1 = 200J safety toe, antistatic, energy absorbing heel, sole with ridges, sole resistant to hydrocarbons and oils.

P = anti-puncture insole pads.

OTHER CERTIFICATES

certificado-ecolabel

The European Ecolabel guarantees products that can reduce adverse environmental effects compared with other products in the same category, thus contributing to efficient use of resources and a high level of environmental protection. This objective is accomplished by providing consumers with guidance and accurate, non-misleading and scientifically based information on these products.

certificado-ESD

Neutralizes the ESD effect (Electrostatic Discharge), which is caused by an imbalance of voltage between energy-charged objects in contact with people: it’s a discharge that only lasts a few seconds, but it can cause imperceptible damages in certain equipment at first instance. For example, during the production of electronic or electromagnetic devices such as microchips or magnetic tapes, any electrostatic discharge can cause damage.

Certificado Origen Español

OEC (Spanish Origen Certificate) certifies that this product is manufactured in Spain by a Spanish company.

inescop

Assessed by the Assessment Service INESCOP as favourable in tests such as: Visual inspection, weight, dimensional assessment, flexibility, slip resistance, antistatic properties, shock absorption, insulation from the cold, sweat management and usage.